A crown used to mean two appointments, a tray of impression putty, a plastic temporary, and a week of avoiding the left side of your mouth.

CEREC changed that. The tooth is scanned, the crown is designed on a screen, a ceramic block is milled in the office, and the restoration is bonded before you leave. One visit, one appointment, no temporary.

It is a genuine improvement in convenience. It is not the right solution for every tooth, and it is not automatically cheaper than a lab-made crown. Here is what the technology does, what it costs in San Francisco, and when the older method is still better.

What CEREC actually stands for

CEREC is a chairside CAD/CAM system: computer-aided design and computer-aided manufacturing. The name is an acronym for Chairside Economical Restoration of Esthetic Ceramics, which is a mouthful for a simple idea.

Instead of taking a physical impression and sending it to a lab, the dentist:

  1. Scans the prepared tooth with an intraoral camera
  2. Designs the crown in software, using the opposing teeth and bite as a guide
  3. Sends the design to a milling unit in the office
  4. Mills the crown from a ceramic block
  5. Finishes, glazes, and bonds it

The whole sequence usually takes two to three hours of chair time, including anesthesia and bonding.

The one-visit timeline

Minutes 0–15. Numb the tooth, remove the old filling or damaged structure, and shape the tooth for the crown.

Minutes 15–30. Scan the upper and lower arches and the bite. No impression tray, no gagging.

Minutes 30–45. Design the crown. The software proposes a shape, and the dentist adjusts the contacts and the bite.

Minutes 45–75. Mill the crown. The machine cuts the ceramic block while you wait.

Minutes 75–105. Try in, adjust the fit and bite, glaze, and bond.

Minutes 105–120. Final bite check and polish.

Some cases are faster. Some take longer if the tooth needs a buildup or the bite needs more adjustment.

What it costs in San Francisco

A CEREC crown typically costs $1,000 to $2,500 per tooth in San Francisco, which is the same range as a lab-made all-ceramic crown. The technology does not usually carry a premium, because the practice saves the lab fee and the second visit.

Insurance usually covers crowns at 50% of the allowed amount after the deductible, and the out-of-network guide explains the reimbursement math, whether the crown is milled in the office or made in a lab. The procedure code is the same.

The variables that move the price are the tooth, the amount of remaining structure, whether a buildup is needed, and whether the crown is in the esthetic zone. A molar is usually straightforward. A front tooth may need a lab ceramist for the best color match.

When a same-day crown is a good fit

A cracked or fractured molar. The tooth needs full coverage, and a milled ceramic crown can protect it the same day.

A large failing filling. When the filling covers more than half the tooth, a crown or onlay is more durable than another filling.

A root canal treated tooth. These teeth become brittle and often need a crown. A same-day crown avoids a temporary that can break between visits.

A patient who cannot take a second day off. One visit is a real advantage for people with demanding schedules or caregivers.

An inlay or onlay. CEREC can mill a partial restoration that preserves more tooth structure than a full crown.

When a lab crown is still better

The tooth is very short. A milled crown needs enough height to retain. A lab can layer porcelain or use a different design.

The margin is deep under the gum. The scan may not capture the edge reliably. A lab can work from a physical impression and a custom model.

The tooth is in the esthetic zone and color is critical. A master ceramist can layer porcelain to match the neighboring teeth in a way that a single block cannot.

The bite is complex. A lab can use a fully adjustable articulator and a wax-up to refine the contacts.

The patient grinds heavily. A monolithic ceramic crown is strong, but the opposing teeth and the crown itself still need protection. A nightguard is part of the plan.

A good practice will tell you which category you are in before scheduling. The technology is a tool, not a mandate.

What can go wrong, and how it is handled

Same-day does not mean failure-proof. Most problems are caught and fixed before you leave.

The scan misses the margin. If the edge of the preparation is not captured, the crown will not seal. The dentist re-scans or, in some cases, switches to a lab crown.

The crown fits but sits high. The bite is adjusted in the chair. A high spot that is missed can cause soreness or fracture.

The shade is off. Milled ceramic blocks come in a range of shades, but they cannot be layered like a lab crown. If the color does not match, the crown can be remilled or replaced with a lab restoration.

The block fractures during milling. It happens. A new block is loaded and the process restarts, which adds 20 to 30 minutes.

The tooth needs more structure removed than expected. A deep crack may change the plan from a crown to an extraction and implant. The dentist should tell you before proceeding.

The bite changes after bonding. A crown that is slightly high can make the jaw sore for a few days. A quick adjustment resolves it.

The advantage of same-day is that problems are visible immediately. The disadvantage is that you are in the chair while they are fixed.

Is same-day always better?

For a busy patient, yes. One visit instead of two, no temporary, no second round of anesthesia, and no waiting a week for a lab.

For a patient with a complex bite or a visible front tooth, not necessarily. A lab can use a master ceramist, a trial smile, and a layered porcelain that a single block cannot match. The extra visit buys a better result.

The decision should be clinical, not marketing. Ask: “Is this tooth a good candidate for same-day, and what would I gain or give up with a lab crown?” If the answer is honest, you can choose with confidence.

CEREC versus a lab crown

CEREC Lab crown
Visits One Two or more
Temporary None Usually needed
Impression Digital scan Digital scan or putty
Material Milled ceramic block Layered or monolithic ceramic
Esthetics Very good for posterior teeth Better for complex anterior cases
Repair Can be polished or repaired in some cases Often requires replacement
Cost $1,000–$2,500 $1,000–$2,500

The cost is similar. The difference is time, control, and the skill of the person designing the restoration.

How long does a same-day crown last?

A well-made ceramic crown can last a decade or more with good care. The variables are the same as any restoration: the amount of healthy tooth structure, the bite, hygiene, and whether you grind.

Three things shorten the life of a crown:

What the appointment feels like

The preparation is similar to a filling. You are numb, so there is pressure but not sharp pain. The scan is quick and does not trigger a gag reflex.

The milling is the strange part. The machine whirs for 15 to 20 minutes while you wait with a temporary cover on the tooth. Some patients read; some watch.

After bonding, the tooth may feel slightly sensitive for a few days, especially to cold. That is normal. If the bite feels high when you chew, call the office. A quick adjustment is better than waiting for the tooth to become sore.

Aftercare that actually matters

Avoid hard foods for the first 24 hours. The bond needs time to reach full strength.

Floss around the crown. The margin is the vulnerable point. A water flosser helps, but it does not replace floss.

Wear a nightguard if you clench. This is the single best investment you can make in a crown’s lifespan.

Do not use your teeth as tools. Opening packages, tearing tags, and biting nails are how crowns chip.

Keep the recall. A crown can look fine while decay develops underneath it. The dentist needs to check the margin and the bite at each visit.

Local care in the Inner Sunset

Sunset Dentistry is at 919 Irving Street, Suite 101, between 10th and 11th Avenues. The office has a CEREC milling unit, which means a crown can be designed, milled, and bonded without a second trip across town.

That matters for patients who work at UCSF, commute on the N Judah, or live in the Outer Sunset and Richmond. A single visit is easier to fit into a clinical schedule than two.

If you have a cracked tooth or a failing filling, call (415) 681-7001 or request an appointment. The office can tell you whether the tooth is a candidate for same-day treatment or needs a lab.

Frequently asked questions

Is a CEREC crown as strong as a lab crown?

Yes, for most posterior teeth. Both are ceramic. The difference is the manufacturing method and the design, not the fundamental strength of the material.

How long does a same-day crown appointment take?

Usually two to three hours, including preparation, scanning, milling, and bonding. Some cases are faster; complex cases take longer.

Does insurance cover a CEREC crown?

Most plans cover crowns at 50% of the allowed amount after the deductible, regardless of whether the crown is milled in the office or made in a lab. Check your annual maximum and frequency limit.

Is a same-day crown more expensive?

No. In San Francisco, both CEREC and lab crowns usually run $1,000 to $2,500. The practice saves the lab fee and the second visit, not the patient.

Can a CEREC crown be used on a front tooth?

Sometimes. It works well for many anterior teeth, but a lab ceramist may produce a better color match and translucency for a visible front tooth. The dentist should advise you case by case.

What happens if the crown does not fit?

The dentist adjusts it in the chair. If the fit or the bite cannot be corrected, the crown can be remilled the same day in most cases.

How long should I wait to eat after a same-day crown?

Wait until the anesthesia wears off to avoid biting your cheek or tongue. Soft foods for the first 24 hours are reasonable, then return to normal chewing.


About the author: Dr. Sophya N. Morghem, DMD, MS is a general dentist and the owner of Sunset Dentistry in San Francisco’s Inner Sunset. She holds a Master of Science in Materials Science and Engineering from the University of Florida, earned her DMD at UNLV, completed an implant fellowship with the International Congress of Oral Implantologists, and has been a member of the American Academy of Cosmetic Dentistry since 2013.